Richter GS Series Strainers - Manual (Page 11)

Series GS
Page 11
9540-060-en Revision 05
TM 6506 Edition 05/2006
10.2 Dimensional drawing
Face to face acc. to ISO/DIN, PN 16
DN 15/20 25 40 50 65 80 100
L 130 160 200 230 290 310 350
H 112 156 197 205 205 313 327
A ca. 100 ca. 130 ca.160 ca. 160 ca. 160 ca. 230 ca. 240
dimensions in mm
Face to face acc. to ANSI/ISA 78.08.01, class 150
DN ½" / ¾" 1" 1½" 2" 2½" 3" 4"
L 130 * 185 222 254 -- 298 350 *
H 112 156 197 205 -- 313 327
A ca. 100 ca. 130 ca.160 ca. 160 -- ca. 230 ca. 240
dimensions in mm
* dimensions not acc. to ANSI/ISA
Flange connecting dimensions:
Flanges to DIN EN 1092-2, type B (ISO 7005-2, type B) PN 16 or flanges drilled to ASME B16.5 Class 150,
flanges to ASME B16.5 Class 150, raised face