Richter KSEA/F Series Safety Valves User Manual
Safety relief valves, Series ksea/f, With asme - certification
Advertising
Table of contents
Document Outline
- INSTALLATION AND OPERATING MANUAL
- List of Contents
- Relevant documents
- 1 Technical data
- 2 Safety
- 3 Safety notes for applications in potentially explosive areas based on the Directive 94/9/ EC (Atex 95)
- 4 Safety note for valves, certified to Clean Air Act (TA Luft)
- 5 Transport and storage
- 6 Installation
- 6.1 Sizing of the inlet line
- 6.2 Sizing of the outlet line
- 6.3 Valve connecting dimensions
- 6.4 Flange caps and gaskets
- 6.5 Direction of flow and installation
- 6.6 Grounding
- 6.7 Installation
- 6.8 Blocking screw (option)
- 6.9 Signal transmitter (Option)
- 6.10 Design for highly permeating media (Option)
- 6.11 Shortened or no lifting lever (Option)
- 6.12 Travel stop (Option)
- 7 Operation
- 8 Malfunctions
- 9 Maintenance
- 9.1 Screw connections
- 9.2 Cleaning
- 9.3 Modification of the safety valve
- 9.4 Adjustment of the test pressure
- 9.5 Important notes on dismantling / installation
- 9.6 Replacement of components
- 9.7 Dismantling KSEA/F 100/150
- 9.8 Assembly KSEA/F 100/150
- 9.9 Tests
- 9.9.1 Lift
- 9.9.2 Adjustment of set pressure
- 9.9.3 Pressure setting
- 9.9.4 Set pressure tolerances
- 9.9.5 Seat tightness test
- 9.9.6 Seat tightness test with air
- 9.7.7 Leakage test with air
- 9.9.8 Acceptance criteria (air)
- 9.9.9 Seat tightness test with water
- 9.9.10 Leakage test with water
- 9.9.11 Acceptance criteria (water)
- 9.9.12 Back pressure test
- 10 Drawings
- Safety Information / Declaration of No Objection