Richter KSE-C/F Series Safety Valves - Manual (Page 8)

Series KSE/F, KSE-C/F
Page 8
9530-050-en
Revision 04
TM 7489 Edition 03/2009
5.3 Storage
If the valve is not installed immediately after delivery,
it must be put into proper storage.
It should be stored in a in a dry, vibration-free and
well ventilated room at as constant a temperature as
possible.
Elastomers are to be protected against UV light.
In general, a storage period of 10 years should not be
exceeded.
Store the valve in an upright position and secure it
from falling over! In case of prolonged storage
individual packing with a desiccant may be necessary.
Pay attention to local site.
5.4 Return consignments
Valves which have conveyed aggressive or
toxic media must be well rinsed and cleaned
before being returned to the manufacturer's
works.
It is imperative to enclose a safety information
sheet / general safety certificate on the field of
application with the return consignment.
Pre-printed forms are enclosed with the installation
and operating manual.
Safety precautions and decontamination measures
are to be mentioned.
5.5 Disposal
Parts of the valve may be contaminated with medium
which is detrimental to health and the environment
and therefore cleaning is not sufficient.
Risk of personal injury or damage to the
environment due to the medium!
Wear protective clothing when work is performed
on the valve.
Prior to the disposal of the valve:
Collect any medium, etc. which has escaped
and dispose of it in accordance with the local
regulations.
Neutralise any medium residues in the valve.
Separate valve materials (plastics, metals, etc.)
and dispose of them in accordance with the local
regulations.