CITIZEN CALIBRE 8700 User Manual

Page 4

Advertising
background image

Setting Instructions for BL80** Calibre 8700 Series

Cal. No. E870


ZERO-POSITION CHECK PROCEDURE

1.) If your timepiece malfunctions in some way or completely looses power, it will be necessary to first

check the Zero Position of the hands.

2.) To begin, pull the crown out one ‘click’.

3.) Next turn

the crown clockwise or counterclockwise, so that either tip of the Mode hand, is pointing to

the L-TM, or Local Time mode.

4.) Now push the crown one ‘click’, back to the closed position next to the case.

5.) Next, while still in the L-TM or Local Time mode, press and hold the upper right button pressed for 10

or more seconds until the hands start to move and then release the button. The hands will automatically
move to the zero-position stored in memory. The correct zero-position for each hand is as follows:

- The Hour, Minutes and Second hands should point to ‘12:00

- 24 Hour hand should point to ‘24’

- Function hand should point to ‘SUN’

- The Date should indicate ‘1’

6.) If any of the hands do not indicate their respective 0-position, or if the date does not indicate 1, please

go to the “All Reset” procedure to perform the all reset and zero-positioning correction procedure.

7.) Press and release the upper right button to resume normal operation in the Local Time mode.

Remember, if any of the hands did not indicate the correct 0-position, you must perform the ‘all-reset
and 0-positioning correction procedure.”


Advertising