Sky-Watcher Multi-Purpose Computerized Mount - Manual (Page 11)

11
7. Loosen the dovetail holder’s hand screw on the fork arm and slide the Dovetail Bar (a) into the dovetail holder. Secure using the
hand screw. The mount should now look like Fig. 20 and Fig. 21.
Fig. 20 Fig. 21
8. The camera’s position may be adjusted in 3-dimensions on the Portrait Mounting Bracket, as shown in Fig. 22.
a.Forward and backward (X axis)– adjust the Portrait Mounting Plate (d) along the Dovetail Bar (a)
b.Left and right (Y axis) – adjust the Mounting Plate (d1) on the Dovetail Bar Clamp (d2)
Y
X
Fig. 22