Time mode – Soleus GPS Fit (SG100) User Manual
Page 5
GPS Fit
CG12
TIME mode
•
Press S7 from SET mode to TIME mode. The watch will momentarily display TIME and
then display Time 1.
•
Press S5 to momentarily view Time 2 from Time 1.
•
Press and hold S5 to change the view from Time 1 to Time 2.
•
Time 1 will not display T1 or the city code even if the time is set to GPS
•
Only Time 2 will display T2 if time is set manually or the City code if the time is set by GPS.
TIME/NIGHT/CONTRAST/CHIME setting in Time mode:
Press and hold S11 until the “TIME” blinks. Press S1 or S11 to select any of the sub views:
TIME, NIGHT, CONTRAST and CHIME setting. Press S5 to enter selected sub-views. Press
S1 or S11 to change the value. Press S5 again to confirm. Press S7 to exit setting.
TIME 1/ TIME 2 setting in TIME mode:
•
Press S5 while TIME is blinking. The watch will display T1 or T2.
•
Press S1/S11 to choose between T1 or T2 to set.
•
Press S5 to set the selected time (T1 or T2). The watch will display GPS or MANUAL.
•
Press S1/S11 to select GPS or MANUAL. You have two options in setting the watch,
GPS or MANUAL. In manual setting, you can manually set the time. If you select the
GPS option, the watch will be automatically set based on the data and time data from
GPS satellites.
GPS setting:
o
While GPS is blinking, Press S5 to set the TIME ZONE.
o
Press S1 or S11 to change the time zone. There are 36 city codes to choose from.
o
Press S5 to confirm and set DST ON /OFF.
o
Press S1/S11 to change setting.
o
Press S5 to confirm and set 12H/ 24H format setting.
o
Press S1/S11 to change 12H/24H format setting.
o
Press S5 to confirm and set M-D or D-M format setting.
o
Press S1/S11 to change the setting.
o
Press S5 to confirm and go back to TIME setting screen.
MANUAL setting:
o
While MANUAL is blinking, Press S5 to enter.
o
Set the HOUR by pressing S1 or S11 and then press S5 to enter.
o
Set the Minute by pressing S1 or S11 and then press S5 to enter.
o
Set the SECOND by pressing S1 or S11 and then press S5 to enter.
o
Set the YEAR by pressing S1 or S11 and then press S5 to enter.
o
Set the MONTH by pressing S1 or S11 and then press S5 to enter.
o
Set the DATE by pressing S1 or S11 and then press S5 to enter.
o
Set the 12/24H by pressing S1 or S11 and then press S5 to enter.
o
Press S5 to confirm and set M-D or D-M format setting.
o
Press S1/S11 to change the setting.
o
Press S5 to enter and go back to TIME setting screen.
Night setting in TIME mode:
•
Press S5 while NIGHT is blinking. The watch will display 10 seconds blinking.
•
Press S1/S5 to change to 20 sec or NIGHT ON.
•
While on 10 SEC or 20 SEC setting, Press S5 to accept the setting and go back to NIGHT
setting screen.
•
While on NIGHT ON setting screen Press S5 to accept the ON setting. The watch will
display the START TIME.
•
Press S1/S11 to toggle between START TIME and END TIME.
•
Press S5 or 3 seconds auto to set the START TIME. Hour digit will start to blink.
•
Press S1/S11 to change the hour setting.
•
Press S5 to change the MINUTE. Minute digits will start to blink.
•
Press S1/S11 to change the minute setting.
•
Press S5 to go back to START TIME setting screen.
•
Press S1/S11 to set the END TIME. Hour digit will start to blink.
•
Follow the procedure in setting the START TIME.
•
Press S7 to exit to NIGHT ON setting screen.
•
Press S7 to exit to NIGHT setting screen.