SONIQ AWM1521 - Manual (Page 5)

7. Cable Management 6. Hook the TV onto the Wall Mount
· the TV.
· Place the lower flat nut, tighten both flat nuts.
Level
Connect cables to your TV and route cables through cable clip, then attach the cable cover to hold the cable in
place.
Note: Leave slack in cable for cantilever arm movement.
4mm
Hook the TV onto the wall mount
Loosen the upper flat nut
spacing 4mm to VESA plate.
Adjust to the desired location or tilt.
8. Adjustment
180°
+15°
-15°
180°
-3°
+3°
H
G
E
Attach cable clip to
the arm using
appropriate screw.