Compuprint SP40 - Manual (Page 23)

19
L L e e d d s s
On, if the printer is powered on.
Off, if the printer is powered off.
ON L INE
Lit, when the printer is on line.
Unlit, when the printer is off line.
Blinks, when data are present in the printer buffer and the printer is not ready (offline or paper out
condition).
If the printer is in Setup M ode, this led indicates which setup page is selected for printing. See
“ Printer Setup ” later in this manual.
EJECT
STATION
1
When using the IBM 4722, IBM 9068 and the Olivetti protocols in two operators (“booking”) mode,
the STATION 1 led is under software control.
If the printer is in Setup M ode, this led indicates which setup page is selected for printing. See
“ Printer Setup ” later in this manual.
Blinks, together with the other operator panel leds, if a printer error occurs.
STAT ION
2
LQ
Lit when the Letter Quality print mode is selected.
When using the IBM 4722, IBM 9068 and the Olivetti protocols in two operators (“booking”) mode,
the STATION 2 led is under software control.
If the printer is in Setup M ode, this led indicates which setup page is selected for printing. See
“ Printer Setup ” later in this manual.
Blinks, together with the other operator panel leds, if a printer error occurs.