页面 8, Before operation cleaning disc, Handling disc – SONIQ D100 User Manual

Page 9: Cleaning, Condensation, Placement, Sceurity

Advertising
background image

Before operation

CLEANING DISC

Before playback, wipe the disc outward from the centre with clean cloth.

Do not use any type of solvent such as thinner, benzine, commercially

available cleaners or antistatic spray.

HANDLING DISC

To keep the disc clean, do not touch the playsides of the disc.

Do not attach paper or tape to the disc.

Keep the disc away from direct sunlight or heat sources.

Store the disc in a disc case after playback.

CLEANING

Use a soft cloth with a little neutral detergent to wipe the cabinet, panel and

controls.

Never use abrasive paper, polishing powder, solvent like alcohol or gasoline.

CONDENSATION

Moisture will appear on the pickup lens in the following cases:

The unit is suddenly moved from a cold place to a warm place.

The unit is put in a room with a heater, or in cold air from an-conditioner.

The unit is suddenly moved from a cold place to a warm place.

Using the unit in a humid place. In these cases, the unit can not work.

Unload the disc and leave the unit on for about one hour to evaporate

the moisture.

PLACEMENT

Put the unit where ventilation is good enough to prevent overheating.

Never put the unit in direct sunlight or near heat sources.

Put the unit in horizontally, never put any heavy object on the unit.

To protect the pickup, do not put the unit where there is dust. If there

is dust on the pickup, use a cleaning disc to clean it. Paying particular

attention to the operating instructions of the cleaning disc.

SCEURITY

Before operation, check if the voltage of the unit is in line with the local voltage.

Hold the plug to disconnect it from the mains outlet. Do not pull the power cord.

Do not open the cabinet as laser rays employed by the unit may damage eyes.

Any servicing should be done by qualified service personnel.

When the plug of the unit is connected to the mains outlet, the unit will be still

connected to AC even if the power is turned off.

Disconnect the plug as soon as liquid or objects enter the unit. The unit can not

be used until being checked by experts.

Advertising