SONIQ DVP1000 - Manual (Page 22)

Using the battery pack
Important!
• When inserting the battery pack, make sure that it is inserted correctly.
Otherwise, your DVD player may malfunction.
Use the AC adapter (included) to charge the battery pack.
Charging the battery pack
1
2
1. Connect the DC cord to the DC IN jack on the side of the DVD player ( ).
2. Plug the other end of the AC cord into an AC outlet ( ).
Power Charge Lamp
-Red LED will light while changing.
-When the battery pack is fully charged, LED will change to green and remain green.
To install the battery pack, locate the battery
pack back alignment lugs in the holes in the
back of Portable DVD Player (1) and gently
slide the battery pack until it clicks into place
(2) (see below).
To remove the battery pack, slide the
release button on the left of the
battery pack to the rear and hold while
gently sliding the battery pack in the
opposite direction to installation.
- 21 -