Basic operation, Turning the tv on and off – SONIQ E46Z11A User Manual
Page 26
Turning the TV On and Off
1. Insert the power cord plug into a polarized AC outlet.
2. If TV is in standby mode Press POWER button on
the remote control or button on the bottom panel
of LED TV.
3. Normal picture will be displayed on the screen after 15 seconds. If no signal input, "No Signal" will be
displayed on the screen.
4. If temporary POWER off is required, press POWER button on the remote control or button on the
bottom panel.
5. If you want to completely switch off the power for this unit, unplug the power cord plug for this unit.
6. After switching off the unit, you should
Status indication lamp
button is lighted: In standby mode.
Auto power-off
If there is no signal, the TV will
10 minutes
Memory before turning TV off
wait at least 5 seconds before switching on again.
automatically enter standby mode after
See 'Auto sleep'
pg. 36 for more details.
The picture and sound settings and preset channels will be memorised at the point when the TV is
turned off. When the TV is started up again it will work accordingly with these settings.
1
How to turn the TV on or off
-25-
Basic Operation