SONIQ L32V11D-NZ - Manual (Page 32)

Sound
Surround Sound
This is used to turn on surround sound to gain better sound effect.
1. Press p/q key to select "Surround sound" option.
2. Press t/u key to select “Surround” or “Off”.
Auto Volume
Each broadcasting station has its own signal conditions, and it is inconvenient to adjust
the volume every time the channel is changed. “Auto Volume” automatically adjusts the
volume of the desired channel by lowering the sound output when the modulation signal
is high or by raising the sound output when the modulation signal is low.
1. Press p/q key to select “Auto Volume" option.
2. Press t/u key to select “On” or “Off”.
.
SPDIF Mode
This is used to select "SPDIF Mode" .This option is only used in HDMI\DTV mode.
1. Press p/q key to select "SPDIF Mode" option.
2. Press t/u key to select "RAW" or "PCM".
User settings for SOUND(Equalizer)
1. Press ▲/▼ key to select equalizer.
2. Press OK or u key to enter the equalizer
.
The sound settings can be adjusted to suit your
user preferences.
1. Press ▲/▼ key to select a particular item.
2. Press t/u key to decrease or increase the
value of a particular item.
Note: The adjusted values are stored according
to the selected particular item.
submenu
Select Menu:Return
SO
UN
D
Equalizer
环绕声
HDMI 声音 HDMI
自动音量控制
超重低音
丽音
关
关
关
立体声
Equalizer Adjust
120Hz 50
1KHz 50
3KHz 50
10KHz 50
SPDIF Mode PCM
2 2 2 30
Menu system instruction