SONIQ L32V12B - Manual (Page 6)

Connecting the USB Device
Connection and setup
Connect the power cord directly to the wall outlet.
Wall outlet
Power cord
Connecting the Power Cord
-10-
Insert USB device directly to the unit.
1. Please do not turn off the TV or unplug the USB device when the connected USB storage device is
working. When such device is suddenly separated or unplugged, the stored files or the USB storage
device may be damaged.
2. Please use only a USB storage device which was formatted as a FAT32 file system, NTFS file system
provided with the Windows operating system. In case of a storage device formatted as a different utility
programmer which is not supported by Windows, it may not be recognized.
3. Please connect power to a USB storage device(over 500mA) which requires an externa lpower supply.
If not, the device may not be recognized.
4. If the USB HDD does not have an external power source, the USB device may noy be detected.
So be sure to connect the external power source.
5. The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less
for USB memory.
6. Only English is supported in USB mode. Other languages such as Chinese, Japanese, etc.
will not be displayed or display an error.
-9-
Connecting VGA Signal
Connection and setup
Connecting with an HDMI to HDMI cable
Connect the HDMI output terminal of your HDMI device to the HDMI input terminal on the unit using an
HDMI cable.
Connect PC video output to the VGA IN input terminal using Mini D-SUB 15-Pin cable.
Connect the audio output of your PC to the unit VGA AUDIO IN input terminal using an appropriate cable.
1. If the input signal resolution is higher than the default display resolution, the screen may be unable to
display image details clearly.
2. Certain PC models cannot be connected to the unit.
3. The computer in the illustration is shown only for reference; your equipment may vary.
4. Additional equipment shown in the illustration is not provided.
5. Do not set the computer’s horizontal and vertical scanning frequencies less then or greater than the
frequency range of the unit. (refer to supported PC Input Signal)
6. If you require more information on how to connect your equipment, please refer to the manual for
the piece of equipment you wish to attach.
The product must be operated only from the type of power source indicated on the marking label (220-240 ~ 50Hz).
If the unit will not be used for a long period of time, it should be unplugged from the wall outlet.
USB Device
HDMI cable
D-SUB 15-pin cable
(VGA cable)
Audio cable
PC