SONIQ MB405 - Manual (Page 3)

LOCATION OF CONTROLS
Top View
Back View
1. M (MODE) Button To select different play modes: Bluetooth/FM/Aux
2. Button
In Bluetooth mode :Tap this button once to return to the beginning of
current track or previous track.
In FM mode:
Press and hold this button to auto search and automatically saveup all the
stations with strong signals in sequence.It will automatically playthe No. 1
station saved once the auto searching is finished..
Tap this button continuously to manually tune to desired station.
3. (On/Off)/ buttonw
Press and hold this button to turn the unitOn or Off.
In Bluetooth playback mode: to play/ pause current playback
In Bluetooth mode: when receiving an incoming call on your cell phone,
tap this button once to answer the phone, tap this button again to end the call
or ignore the incoming call.
In FM mode: to select the preset stations in sequence
4. Button
In Bluetooth mode :Tap thisbutton once to to advance to the next track.
In FM mode:
Press and hold this button to auto search and automatically saveup all the stations
with strong signals in sequence.It will automatically play the No. 1 station saved
once the auto searching is finished.
Tap this button continuously to manually tune to desired station.
5. -Button Press this button to adjust volume level down.
6. +Button Press this button to adjust volume level up.
7. Built-in Microphone
8. LED Display
9. BatteryStatus Indicator (Green color)
Rapid flashing =low batteryu
While charging :
Flashing =charging
Steady Green= full charged
10. Telescopic Antenna
11. Aux-In Jack
12. USB port(for charging external devices only)
13. AC Socket
·
·
·
·
·
·
·
·
·
·
·
·
Power Supply
This unit is designed to operate on AC 100-240V~50/60Hz household mains supply or the
built-in rechargeable Li-ion battery.
Connect To AC Power
Before using this new Wireless speaker the first time, you should connect it to AC (mains) power.
1.Plug the connector of AC cord into the AC socket on the back of the speaker unit.
2.Plug the AC cord plug into a convenient AC wall outlet.
3. The green color battery charging indicator will light up & charging begins.
4.Press and hold the Button to turn on the unit, the LED display will light up.
5.Press and hold the Button again to turn off the unit.
6.Remove the AC cord out of the wall outlet if you want to switch off the main voltage completely.
OPERATING THE SPEAKER IN BLUETOOTH MODE
Bluetooth involves a technology for wirelessradio connection of devices over a short distance.
Devices with Bluetooth standardare transmitting between 2.402 and 2.480 GHz in the ISM band
(Industrial,Scientific and Medical). Interference can be caused, for example byWLAN-networks,
DAB radios, cordless phones, or microwave ovens which work onthesame frequency band.
This speaker offers you the possibility to use a Bluetooth enabled device. The functional radius is
limited to approx.10 metresdepending on the surroundings and the unit used.
If your playing device supports the A2DP profile(Advanced Audio Distribution Profile) and has a
music-player function, then youcan also wirelessly transfer music to the device. The A2DP profile
involves amulti-vendor Bluetooth profile. By streaming, stereo-audio signals are wirelessly
transferred between the playing device (source) and the receivingdevice.
Due to the different device manufacturers, models,and software versions, a full functionality
cannot be guaranteed.
·
·
·
Pairing (Linking) A Bluetooth Enabled Cell Phone Or Other Bluetooth Enabled Device To
The Speaker
If the speaker has never been paired with a Bluetooth device before . You need to follow the pairing
instructions below to link the speaker with your Bluetooth device .
1.When the speaker turned on, press the “M” button repeatedly, until “bLUE” is shown on the display.
The “bLUE” symbol flashes to show that the speaker is ready to pair (link) with your Bluetooth device.
2.Activate Bluetooth on the compatible device, and set it to search for compatible devices.
3.Select the speaker name: “MB405” from the list of found devices.
Tips: Only one playback unit can be connected to the speaker. If the speaker is already connected to
another playback unit, the speaker will not appear in the BT selection list.
4.If your device asks for a passkey (depending on the device manufacturers, model, and software
version), then enter digits “0000”(four zeros) and press OK.
If pairing has been carried out successfully, a beep sound is heard, meanwhile, the “bLUE” symbol
stops flashing.
If the speaker has ever been paired with a Bluetooth device before. You need to follow the
pairing instructions below to link the speaker with your Bluetooth device .
1.After turning on the speaker, the speaker will search for the last paired device. If the unit finds the
paired Bluetooth device, a beep sound is heard and The “bLUE”symbol stop flashing .
2.After successfully pairing (linking) , you can begin playing music from your Bluetooth device
wirelessly to the speaker .
3.Press the + / - button on the speaker to adjust to the desired volume level.
4.To stop the unit, press and hold the Play/Pause on main unit to turn off the device.
Using The Speaker as a Handfree Bluetooth Speakerphone
1.Link your cell phone to the speaker via Bluetooth as described above.
2.When receiving an incoming call on your cell phone , tap button on the speaker to switch the
incoming call from cell phone to the speaker. A short beep sound will be heard confirming the call was
answered. Complete your call using the built-in microphone and speaker.
3.Adjust the volume control of your cell phone to obtain the desired sound level.
4.To end the call, just tap the button again, a short beep sound will be heard and the call will end.
If you were playing music from your cell phone to the speaker before answering the call, the music
will automatically resume playing when you hang up.
OPERATING THE SPEAKER IN BLUETOOTH MODE