SONIQ MB410 - Manual (Page 4)

AUX IN Mode:
USB Charging:
The unit will automatically turn to AUX in mode to
start playing music when the 3.5MM AUX line is
inserted. At that time, the blue indicator light will
flash slowly. Bluetooth will stop automatically if the
AUX line is connected. The blue LED light will turn
red to indicate AUX function. Bluetooth will
reconnect automatically to the last paired device
when the AUX in line is removed.
Please insert a micro USB cable into the micro USB
interface of the speaker to charge the built-in battery
when powering off the unit, and the red light will go
off once battery is fully charged. In the “Power on”
mode, charging the battery with a Micro USB cable,
the red charging indicator light will be lightening
unchangedly.
LED Indicators：
Status LED indicator
Power off the unit
All LED lights are off
Power on the unit to
enter into Bluetooth
mode
Bluetooth blue LED light
flash until connected.
Successful Pairing
Bluetooth playing
status
Micro USB charging
status
AUX- in mode
Blue LED light will remain on
Blue LED light will flash
slowly
The red light near the Micro
USB port will be on. The red
light will go off once battery
is fully charged.
The red light on the front
panel will be on in the AUX
in mode.