SONIQ MP5 - Manual (Page 8)

Firmware upgrade is an operation to promote and optimize the performance of the player. Even if the firmware works
without upgrading, there is no any influence on the normal operation of the player.
Incorrect operation of firmware upgrading may cause the player working abnormally. Please read the manual
carefully before operation and people should operate firmware upgrading with basic knowledge in computer operation.
The upgrading firmware is specially programmed for this player only and not suitable for other serial player, and
other firmware is not suitable for this player as well.
8. Choose new firmware program (You may find it in accessory CD or download from our website.)
9. Press 'Start' button, the system starts upgrading.
10. If upgrading successfully, LCD will display like:
13 14
USB DISK
The player supports standard USB disk function with operating system of Window98 (drive needed). Windows 2K
and above (drive free); Mac OS 10.3 and above; Linux Redhat 8.0 and above.
The player supports power supply through USB. At Standby Mode, press Mode t quit to main menu, then select to
enter desired mode.
The player also supports Suspend Mode.
The player may display three modes after connecting to PC:
1. Standby State
1. Enter main menu
5. Press Mode to enter Firmware Upgrade interface.
Firmware Upgrade：
3. Uploading Mode
3. Press Mode to enter System Setting System Setting：
2. Downloading State
2. Push Next to select 'System Setting' System Setting：
6. Connect player to PC
The player supports firmware upgrading or maintenance through special tools on PC.
FIRMWARE UPGRADE
FIRMWARE UPGRADE
4. Push Next to select Firmware Upgrade.
Firmware Upgrade option：
7. Run the upgrade tools 'MP3 Player Upgrade' on PC, then press 'choose firmware of new version' button.