SONIQ QMD71B - Manual (Page 16)

-16-
Language Setup
1. Press the SETUP button in stop mode.
2. Press the button to select Language Setup Page.
3. Press the / button to select the option (OSD
Language, Audio, Subtitle or Disc Menu), then press
the button.
4. Press the / button to select your preferred
language, then press the ENTER button to confirm.
5. Repeat steps 3 and 4 to adjust other options. Press
the button to return to the previous menu.
6. Press the SETUP or RETURN button to exit the menu.
Notes:
• Some DVDs may not play in the audio language selected. A prior language may be programmed on the disc.
• Some DVDs may be set to display subtitles in a language other than the one you selected. A prior subtitle
language may be programmed on the disc.
• Some DVDs allow you to change subtitle selections only via the disc menu. If this is the case, press the MENU
button and choose the appropriate subtitle language from the selection on the disc menu.
• Some DVDs may not include your pre-selected language. In this case, the DVD player automatically displays
disc menus consistent with the disc's initial language setting.
Go To Language Setup Page
- - Language Setup Page - -
System Language Video
OSD Language
Audio
Subtitle
Disc Menu Eng
Eng
Off
Eng
System Setup
1. Press the SETUP button in stop mode.
2. Press the / button to select System Page.
3. Press the / button to select the option (TV Display,
Parental, Password or Default), then press the
button.
4. Press the / button to adjust the settings, then
press the ENTER button to confirm.
5. Repeat steps 3 and 4 to adjust other options. Press
the button to return to the previous menu.
6. Press the SETUP or RETURN button to exit the menu.
Video Setup
1. Press the SETUP button in stop mode.
2. Press the / button to select Video Setup Page.
3. Press the / button to select the option (Brightness,
Contrast or Video Out Only), then press the button.
4. Press the / button to adjust the setting, then press
the ENTER button to confirm.
For Video Out Only, use the / button to select
On and press the ENTER button, the unit will output
the video to the TV only and the TFT LCD screen
will be off. The TFT LCD screen will be on again
automatically after the unit is power off and on again.
5. Repeat steps 3 and 4 to adjust other options. Press
the button to return to the previous menu.
6. Press the SETUP or RETURN button to exit the menu.
(Continued on the next page.)
Tv Display
Parental
Password
Default Wide
No
Go To System Page
- - System Page - -
System Language Video
Brightness
Contrast
Video Out Only
Go To Video Setup Page
- - Video Setup Page - -
Language
00
00
Off
System Video
Customizing the Function Settings