SONIQ QMS300B - Manual (Page 8)

REMOTE CONTROL BATTERY
The remote control requires one “button-type” 3-volt lithium battery, included. To
extend the life of the original battery we have inserted a small clear plastic spacer
tab between the lithium battery and the battery terminal. You must remove this
battery spacer tab before you can use the remote control. To remove the tab, pull
it in the direction of the arrow in the illustration as shown.
When the operation of the remote control becomes intermittent or unsatisfactory,
replace the original battery with a new 3-volt lithium battery.
1.) Slide out the battery holder from the remote control case.
2.) Place one 3V CR2025 battery in the battery holder, observing the positive (+)
direction. If the battery is placed incorrectly the remote control will not work.
CAUTION
Danger of explosion if the battery is replace incorrectly.
Replace only with the same or equivalent type.
3.) Insert the battery holder into the battery slot.
Notes: Use a well-known brand of cell battery for longest life and best
performance. When the remote operation becomes intermittent, replace the
battery.
- 7 -