SONIQ QSP425T User Manual
Page 15
- 14 -
TURNING THE UNIT ON FOR THE FIRST TIME
The first time you turn the unit on, it will go straight into Auto scan mode. Simply follow the screen prompts as below to tune in the
channels.
1. Use the / button to select the screen menu language you prefer.
2. Use the button to move to Auto Tuning, press the OK button to enter Auto
Tuning menu.
3. Use the button to move to Start. Press the OK button to confirm Start. The
system will automatically start to scan and preset all available programmes,
including Analog (ATV), and Standard-Definition Digital and High-Definition
Digital (DTV) free-to-air programmes.
4. After scanning has finished, the TV will display the first programme stored.
Before turning on your television set for the first time, be sure
to place it on a solid stable surface. To avoid danger, do not
expose the TV to water or a heat source (e.g. lamp, candle,
radiator). Do not obstruct the ventilation grid at the rear and
be sure to leave sufficient gaps around the unit as shown.
4"
4"
4"
Basic Operation