Sound Devices PIX 250i - Manual (Page 74)

PIX 250i User Guide
v. 2.10 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
68
Se
tup Menu Op
tions
# Parameter Name Description Options
3 Rec Start/Stop
Determines what method the PIX 250i uses to auto-
matically start and stop recordings.
» Off
• SDI Flag - RED
• SDI Flag - Panasonic
• SDI Flag - Panasonic (Varicam)
• SDI Flag - Canon
• SDI Flag - Sony
• SDI Flag - Arri
• SDI Flag - PIX
• Timecode
4 GPIO Inputs
Set GPIO inputs (pins 1, 2, and 3 on GPIO connector)
to active high or active low. Active high: Connecting
the pin to +5V will activate the function. Active low:
Connecting the pin to ground will activate the function.
» Active low
• Active high
5 GPIO Outputs
Set GPIO outputs (pins 6, 7, and 8 on GPIO connec-
tor) to active high or active low. Active high: When the
function is true, +5V will appear on the pin. Active low:
When the function is true, the pin will be grounded.
• Active low
» Active high
Network
# Parameter Name Description Options
1 This PIX’s Name
Sets name of PIX 250i. This must be unique within a
network.
» PIX250
2 Grouping Sub-menu for network grouping settings.
2.1 Network Group
Groups with other PIX 250i, PIX 260i, PIX 270i, and
970 units on the network.
» No Group
• Group 1
• Group 2
• Group 3
• Group 4
2.2 Push Settings to Group
Copies this unit’s settings to all other units in the
group. All grouped settings will be pushed. ( See
“Grouped Settings”, page 47 )
2.3 Synchronize audio channel
settings
3 Auto IP Settings
When On, the IP settings will automatically be pro-
vided by a DHCP (recommended), or Link-local when
no DHCP is present. When Off the IP Address, Subnet
Mask, and Gateway will have to be entered manually.
• Off
» On
4 IP Address
Displays IP Address, can be edited when Auto IP
Settings is OFF.
5 Subnet Mask
Displays Subnet Mask, can be edited when Auto IP
Settings is OFF.
6 Gateway
Displays Gateway, can be edited when Auto IP Set-
tings is OFF.
7 Authentication
Set the user name and password to be used for
PIXNET and Samba drive access.
System
# Parameter Name Description Options
1 Power
Determines power on and off method. When set to
Always on, the PIX 250i will turn on and off when
external DC is applied. When Use Power Switch is
selected the PIX 250i is powered on and off using a
key combination of AUDIO + Control Knob press.
» Always On
• Use Power Switch