Recording and playbac k 5, Sampling rate – Sound Devices 788T User Manual

Page 53

Advertising
background image

Sampling Rate

When a sampling rate is selected for recording, all tracks are recorded at the selected sampling
rate. Sampling rates are selected among common rates from 32 kHz to 192 kHz. Additionally, non-
standard sampling rates can be applied when the 788T is word clocked from an external source
(clock sources between 32 kHz and 192 kHz). When recording off-speed sampling rates, fi les will be
stamped with the rate closest to the internally generated frequency.

Sampling Frequency and Audio Bandwidth

The sampling frequency is expressed in samples per second (hertz) and defi nes the number of times
in a second that the analog audio signal has been measured. Sampling frequency determines the
audio bandwidth, or frequency response, that can be represented by the digital signal. A quick esti-
mate of the maximum bandwidth capable of being represented at a given sampling rate is maximum
analog frequency = sampling frequency/2. Higher sampling frequencies allow for wider audio
bandwidth.

The 788T generates the following sampling rates:

• 32 kHz
• 44.1 kHz
• 47.952 kHz
• 47.952 kHz “F Mode”
• 48 kHz

• 48.048 kHz
• 48.048 kHz “F Mode”
• 88.2 kHz
• 96 kHz
• 96.096 kHz

• 96.096 kHz “F Mode”
• 176.4 kHz
• 192 kHz

See Time Code

for more information about F Mode sample rates.

Considerations When Recording With High Sample Rates

Increasing the sample rate above 48.048 kHz requires certain settings to be adjusted and imposes
certain limits to some features. Increasing the sample rate above 96.096 kHz furthers these require-
ments. It is recommended to save settings for work fl ows with a high sample rate, so they can be
easily recalled.

Feature

> 48.048 kHz

> 96.096 kHz

Tracks *

8 tracks total (any) *

Up to 4 tracks (Tracks C-X2 disabled) *

Input Limiters

Disabled

Recording to DVD-RAM

Not supported

High speed (UDMA) CF

Advised

Required

Storage media

2 max

1 max

Input delay

15 ms max

7.5 ms max

EQ (CL-9)

Disabled

MixAssist

Disabled

High Pass filters

Available

Disabled

Pre-roll

5 sec. max

2 sec. max

R

ecording and Playbac

k

5

788T/788T-SSD User Guide and Technical Information

45

Advertising