SoundOff Signal Mighty Night Light SM - Manual (Page 2)

The line below should measure EXACTLY 3” if you want to use the
template above to drill mounting holes. If it measures differently
the installer must enlarge or reduce the page on a copier capable
of such scaling.
ETFFCØ2LED: 10-30v Flasher
Replacement Parts & Accessories:
EAUSSMBØ(x)WC 2.10
SURFACE MOUNT LED SPOTLIGHT
EAUSSMBØSWC - WITH SPOT LENS
EAUSSMBØAWC - WITH REFRACTIVE LENS
n3/8”
2x
n7/32”
2-5/32”
15/32”
3-17/32”
DRIVER SIDE
ARROW
DIRECTION
TECHNICAL SPECIFICATIONS
Overall Dimensions: 4-1/8”H x 2-27/32”W x
1-15/32”D
Input Voltage Range: 10 - 30Vdc
Current Consumption: [email protected]
# of LEDs: 1 High Density Multi-Chip
LED
Operating Temperature: -40º to +65º C
2x
n7/32”
2-5/32”
15/32”
n3/8”
PASSENGER SIDE
ARROW
DIRECTION
The drill pattern below is for use with the refractive lens (EAUSSMBØAWC). If the spot lens (EAUSSMBØSWC) is used this can
be disregarded. HOWEVER, if there is a possibility of using the refractive lens in the future it is recommended that these patterns
be used to prevent future additional drilling.