Starlight Xpress SXV-M7C - Manual (Page 15)

Handbook for SXV-M7C Issue 1 June 2004
15
processing the picture. The SXV-M7C generates very little dark signal and so dark
frames are not essential for short exposures of less than a few minutes, but it is a good
idea to record at least one for each exposure time used during an imaging session. As
variations in ambient temperature will affect the dark signal, it is best to take the dark
frames within a few minutes of capturing your images. For the same reason, it is not
wise to use ‘old’ dark frames if you want the best possible results, however, some
software allows you to scale library dark frames to match the image (e.g. AstroArt).
‘Flat fields’ are often recommended for optimising the results from your CCD
camera, but these are generally less important than dark frames, especially if you
make sure that the optical window of the camera is kept dust-free. The purpose of a
flat field is to compensate for uneven illumination and sensitivity of the CCD and it is
better to avoid the need for one by keeping the optics clean and unvignetted. I will
ignore flat fielding for current purposes and describe the process in detail at a later
stage.
Processing the deep-sky image:
1) Make sure the ‘Auto Contrast Stretch’ is switched off and load your image into
STAR_M7C. Select ‘Merge’ and then ‘Subtract Dark Frame’. Pick the appropriate
dark frame and the software will then remove the dark signal from your image,
leaving it somewhat darker and smoother than before.