Stealth Cam STC-NVM Night Vision Monocular User Manual

Page 5

Advertising
background image

www.stealthcam.com  

Toll  Free  877-­‐269-­‐8490  

5  

FPS  Button  (Default  –  30FPS)  
This  button  will  allow  the  user  to  cycle  through  different  frame  rates.  Decreasing  the  frame  rate  

will  allow  the  sensor  to  gather  more  light  per  frame  and  produce  a  brighter  image.  Additionally  
the  decreased  frame  rate  will  cause  movement  in  the  image  to  become  choppier.    

•

There  will  be  four  different  modes;    
Ø

30FPS  /  25FPS  /  15FPS  /  8FPS  

•

Pressing   the   button   will   increment   the   frame   rate   level   by   1   until   the   last   level   is  
reached.  If  the  fps  button  is  pressed  on  the  last  level  of  frame  rate,  the  first  level  of  

frame  rate  will  be  accessed  again    

•

When  the  unit  is  in  Night  Mode,  the  default  setting  is  25fps.  The  unit  can  only  cycle  

through  25fps,  15fps,  and  8fps.  There  is  no  30fps  option  available.    

•

When  the  unit  is  in  Day  Mode,  the  default  is  30fps.  The  user  cannot  change  the  fps  in  
daytime  mode.    

 
View  Mode    
During   view   mode,   the   LCD   screen   will   display   a   live   image   of   the   camera   sensor   as   well   as  

display  the  digital  zoom  level  in  the  bottom  left  corner  of  the  LCD  screen.  

•

The  digital  zoom  mode  will  be  written  in  green  letters  on  the  LCD  screen    

•

The  digital  zoom  mode  will  be  displayed  as  1X,  2X,  or  3X    

•

(See  Digital  Zoom  Button  for  additional  details)    

 

Nighttime  view  mode;  the  LCD  screen  will  display  a  small  flashlight  in  the  top  right  corner  of  the  

screen.    

•

This  icon  will  represent  if  the  IR  LEDs  are  High,  Low,  or  OFF    

•

This  icon  will  be  a  flash  light  that  will  either  have  a  solid  fill  with  small  lines,  solid  fill  

with  large  lines,  or  no  fill    

•

This  icon  will  be  green    

•

If  the  IR  LEDs  are  OFF,  the  flash  light  will  be  displayed  with  no  fill    

•

If  the  IR  LEDs  are  set  to  Low,  the  flash  light  will  have  a  solid  fill  with  small  lines    

•

If  the  IR  LEDs  are  set  to  High,  the  flash  light  will  have  a  solid  fill  with  long  lines    

•

The  battery  life  will  be  displayed  as  a  battery  symbol  with  0  to  4  bars.    

•

The   color   of   the   battery   symbol   is   green.   Except   when   the   battery   symbol   shows   0  

bars,  then  the  battery  symbol  will  be  yellow    

 
 

Advertising