13 set up and programming terms – Stealth Cam STC-AD3X V390Z User Manual
Page 13

STC-AD3X
www.stealthcam.net
Toll Free 877-269-8490
13
Set up and Programming Terms
• Time out: To set the amount of time in minutes the camera will
sleep between PIR triggering.
• Flash Control:
o
Auto: In low light conditions the flash will activate automatically.
o
Flash Off: Turn off flash light
• Capture mode: The capture mode that you have selected.
o
1 Shot: Single image capturing per PIR triggering.
o
2 Shot: Two images continuous capturing per PIR triggering.
o
3 Shot: Three images continuous capturing per PIR triggering.
o
AVI: Taking 10 seconds video per PIR triggering.
o
Manual: Manual capturing by pressing shutter button to
operate. (use as point and shoot camera or video camera
under Test Mode)
• Image Resolution: The resolution selection that you have selected.