Stealth Cam STC-WD3 I330 - Manual (Page 17)

STC-WD3
www.stealthcam.net Toll Free 877-269-8490 17
• Power on the unit, press the [MENU] button to bring up the
menu on the LCD screen.
• Press [UP] or [DN] to highlight CAPTURE
• Then press the [OK] button to enter capture setting.
• Press the [UP] or [DN] button to select the desired capture
setting (number of pictures per triggering) and press the [OK] to
save. This will return you to the SETTING SCREEN menu.
• Use the UP and DOWN buttons to select additional program
settings or press [MENU] again to exit the SETTING SCREEN.
Set the Resolution:
• Press the [UP] or [DN] to highlight RESOLUTION
• Then press the [OK] button to into the resolution settings.
• Press the [UP] or [DN] button to select the desired resolution
and press [OK] to save