Stealth Cam STC-DVIR5 Prowler - Manual (Page 27)

STC-DVIR5 PROWLER
www.stealthcam.net Toll Free 877-269-8490 27
Viewing and deleting the images
The STC-DVIR5 PROWLER cam offers the user different options
for viewing the images. The external LCD display on the front of
the housing will show the number of images in memory.
To wake the camera from PIR detection mode, press and hold
either the [UP] or [DN] button for about 5 seconds.
The instructions below are based on starting from a camera that
is turned off.
Viewing the image on a handheld LCD TV video monitor or your
home TV equipped with an RCA input jack (cables included)
For viewing on handheld LCD TV, attach the appropriate cable to the
video out jack on the camera. Insert the other end into the video in
jack on handheld LCD TV monitor.
For viewing on home TV, attach the appropriate cable to the video
out jack on the camera. Insert the other end into the RCA video in
jack on the TV. Make sure to switch to VIDEO IN mode on your
TV. (See your TV owner’s manual for directions)