Stealth Cam STC-DVSIR5 ProwlerDVS - Manual (Page 28)

STC-DVSIR5 Prowler DVS
www.stealthcam.net Toll Free 877-269-8490 28
Turn on both the camera and TV monitor.
• Your camera is preset to NTSC TV out system by default. If
the handheld TV screen does not flicker, then you do not need
to set your TV out system. If the handheld TV screen flicker,
then you will need to proceed to the next step to set up your TV
out to PAL system.
• Press the [MENU] button once. The word {tu-N} on the
camera’s internal screen will be blinking. Press [OK] to choose
this selection.
• Press [DN] button to select TV out in PAL System (which is use
in most European and Asian countries). The word {tu – P} will
be blinking Press [OK] to confirm this setting.
• Press [MENU] to exit and continue with your image viewing. It
will display the last image stored in memory.
• You will see thumbnail images. At this point you may use the
[UP] or [DN] button to navigate though your thumbnail images.