Stealth Cam STC-SNX1 Sniper-Shadow User Manual
Page 21
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
21
Setting the Time Out Mode in PIR operation mode:
Your
Stealth
Cam
can
be
programmed
to
set
the
amount
of
time
in
seconds
or
minutes
the
camera
will
sleep
between
PIR
triggers.
•
Switch
the
camera
to
the
ON
position.
Ø
LCD screen will display the camera status screen.
•
Press the [MENU] button once within 30 seconds to enter the
programming mode.
•
The word PIR will be blinking, press [OK] to confirm the camera
operation by PIR detection.
•
Press [UP] button FOUR times to enter Time Out setting mode.
•
The word TIME OUT will be blinking.
•
Press [OK] button and the SECONDS digits will be blinking.
•
Press [UP] or [DN] button to increase or decrease the time value
in seconds from 0 to 59 seconds in 1 second increments.
•
Press [OK] to save the seconds setting and the MINUTES digits will
be blinking.
•
Press [UP] or [DN] button to increase or decrease the time value
in minutes from 0 to 59 minutes in 1 minute increments.
•
Press [OK] to save the minutes setting.
•
You’ll then see the word -‐ TIME -‐ blinking.
•
Press [MENU] button to exit.