Stealth Cam STC-U732K UNIT-7 - Manual (Page 4)

WWW.STEALTHCAM.NET
Toll Free 877-269-8490
13
SETUP AND PROGRAMMING
When the camera is first turned on, the internal LCD screen displays
the camera status. The following information is present on this screen.
( PIR MODE) ( TIME LAPSE MODE)
If no buttons are pressed after 30 seconds the LCD screen will power
down to conserve battery life and enter 1 minute count down to enter
PIR detection mode. To re‐power the display screen, press and hold
the UP or DOWN button until you see the status screen.
Definition
• Day and Time: Displays the date and time that you have set.
• Operation mode:
¾ PIR: Camera takes Image/Video per PIR trigger.
¾ Time Lapse (tLS): Camera takes the still image per preset time.
• Capturing Sequence mode:
¾ 1P ‐ 9P: 1 to 9 burst mode image capturing per PIR trigger.
¾ Video: 10 to 180 seconds’ adjustable video per PIR trigger.
• Resolution for Images: Color Daytime / Black & White Nighttime
¾ 3 Stars (7Mp): Select this option to capture a
7.0M pixels image. (High image quality)
WWW.STEALTHCAM.NET
Toll Free 877-269-8490
14
¾ 2 Stars (3Mp): Select this option to capture a 3.0M pixels
image. (Low image quality)
¾ 1 Star (1.3Mp): Select this option to capture a 1.3M pixels
image. (Base image quality) (Default)
• Resolution for Video: Color Daytime / Black & White Nighttime
¾ VGA: 640x480 *ONLY resolution*
• Time out: To set the amount of time in seconds and minutes the
camera will sleep between PIR triggering.
• Moon phase: Displays the moon phases.
• Temp stamp: Temperature stamp will display on still images and
first frame only on video files.
• Zoom: Digital enhancements to different zoom level.
¾ 1X: Normal – the word “ZOOM” will not display.
¾ 2X: Two times zoom – the word “ZOOM” will display.
¾ 4X: Four times zoom – The word “ZOOM” will blink.
• Battery Status: Shows the battery status.
¾ Full: The battery is full.
¾ Low: The battery is low. (Front Low Battery indicator will also
blink.)
WWW.STEALTHCAM.NET
Toll Free 877-269-8490
15
NOTE: When the camera detects low batteries, the camera unit will
power off within 30 seconds automatically. Please replace with new
batteries; otherwise the camera may not work properly.
Setting the Camera’s Operation Mode:
Your Stealth Cam can be programmed to operation either in PIR
Detection mode or Time Lapse mode.
• Switch the camera to the ON position.
¾ LCD screen will display the camera status screen.
• Press the [MENU] button once within 30 seconds to enter the
programming mode, the word PIR or tLS will be blinking.
• Press the [UP] or [DN] button to select the PIR or tLS.
• Press [OK] to save your selection.
• Press [MENU] button to exit.
Setting the Camera’s Resolution in PIR operation mode:
Your Stealth Cam can be programmed to 3 different resolutions,
High (3 Stars‐7Mp), Low (2 Stars–3Mp), Base (1 Star–1.3Mp).
WWW.STEALTHCAM.NET
Toll Free 877-269-8490
16
• Switch the camera to the ON position.
¾ LCD screen will display the camera status screen.
• Press the [MENU] button once within 30 seconds to enter the
programming mode.
• The word PIR will be blinking, press OK to confirm the camera
operation by PIR detection.
• The word CAMERA and the STARS will be blinking.
• Press the [OK] button ONCE to choose the selection.
• Press the [UP] or [DN] button to select the desired resolution.
• Press [OK] to save your selection.
• Press [MENU] button to exit.