SWIT Electronics S-1051C - Manual (Page 10)

12.2 Installation of S-7001 mount
S-7001 Rear View Installation
S-7001 DV mount is quick releasable. Please follow the instructions:
(1) Please make sure the power terminals are clean and in well condition before use.
(2) Align the S-7001 slots to the bolts of the monitor rear panel, and press tightly in.
(3) Slide the S-7001 mount down to the bottom.
(4) If necessary, fix the S-7001 mount by screws on the top side.
(5) Mount the battery to S-7001 to power the monitor.
Slot
Terminal
Screw hole Battery release