TeachLogic Quantum II - Manual (Page 9)

5
quantum II controls
• Channel A turns power “on/off” (red LED
indicator) and adjusts the volume of the IR
microphone assigned to it. Normally the Pendant
transmitter is assigned to channel A. When the
transmitter is turned “on” a green LED will light,
indicating that an IR signal is being received from
the transmitter.
• Channel B also turns power “on/off” and adjusts
the volume of the microphone assigned to it.
Normally the handheld microphone is assigned to
channel B. When the transmitter is turned “on” an
amber LED will light indicating an IR signal is being
received from the transmitter.
• Tone control adjusts the tonal quality of the
sound. You will feel a center indent, turn CCW will
boost the bass and turning CW will extenuate the
high frequencies.
• Aux input jack (3.5mm) facilitates connecting the
output of a DVD, Video Projector, ipod, computer
and amplifying its signal through the Quantum. The
volume can be controlled with the adjacent knob.
• Line output jack (3.5 mm) provides a composite
line level output; it can be used to connect to a
personal FM assistive listening system or as an
output to a recording device. The small knob
adjusts the output level to match input of the
device connected.
• External speaker output connector is located
adjacent to the power plug. An unpowered external
speaker can be connected to the Quantum for
additional coverage. A companion unpowered
Quantum would be the speaker of choice.
MINIMUM 4 ohm
companion speaker