Display symbols – tekmar 507 Thermostat User Manuals User Manual
Page 2
© 2007
U 507 - 05/07
2 of 4
SETTING THE TEMPERATURE(S)
Use the following procedure to set the desired air temperature.
Step One:
Press and release the
Menu
button until the Adjust Menu is reached.
Step Two:
Press and release the
Item
button until the desired item is displayed.
Step Three: Use
the
or
button to set the desired temperature.
UNITS OF DISPLAY
To select between Fahrenheit and Celsius, use the following procedure.
Step One:
Press and release the
Menu
button until the Adjust Menu is reached.
Step Two:
Press and release the
Item
button until the current temperature unit
begins to flash.
Step Three: Use
the
or
button to select between Fahrenheit and Celsius.
Display Symbols
Warning
Displays when an error exists.
Heat One
Displays when the heat contact
is on.