Getting started – Cobra Electronics MR F55 User Manual

Page 20

Advertising
background image

Nothing comes close to a Cobra

®

Getting Started

35

DSC Geographical Alarm

Loud, continuous, medium-pitched, high-low tones (warble) —
sounds when a geographical call is received. Press any button to turn it Off.

DSC Position Request Alarm

Medium-loud, continuous, low-pitched series of closely spaced, four (4) beeps
[three (3) short – one (1) long] groups — sounds when a position request call
is received. Press any button to turn it Off.

DSC Individual Alarm

Medium-loud, continuous, medium-pitched, two (2) beep groups —
sounds when an individual call is received. Press any button to turn it Off.

Weather Alarm

Medium-loud, continuous, medium-pitched series of one-half (

1

2

) second beeps

spaced one-half (

1

2

) second apart — sounds when weather alert is turned On

and NOAA sends a 1050 Hz weather alert tone on the selected weather channel.
Press any button to turn it Off.

Power On-Off

Transceiver power can be turned On or Off by the On-Off Power/Volume
knob on the transceiver.

To Turn Your Radio On Or Off:

1. Turn the On-Off Power/Volume knob on the

transceiver until you hear and feel a click.

When the radio is powered

On, the confirmation tone

will sound.

The radio will return to the settings in effect when it was
last powered

Off, the LCD will show the corresponding

information, and all controls will be operative. The radio
will then be in Standby mode.

Operating Your Radio

On-Off Power/
Volume Knob

34 English

Getting Started

Getting Started

Refer to the foldout on the front cover of this manual to identify the various
controls and indicators on your radio.

Throughout this manual you will be instructed to press or to press and hold
buttons on the transceiver or on the microphone. Press means a momentary
press, then release; press and hold means to hold the button down for three (3)
seconds or more.

Tones And Alarms

When your CobraMarine

VHF radio is On, you can expect to hear the following

tones and alarms. The volume of these sounds is controlled by the circuitry in the
radio and is not affected by the volume set with the On-Off Power/Volume knob.

Confirmation Tone

Single high-pitched beep confirms all button presses except the Talk button.
It can be turned On or Off. See set-up routines on page 40.

Error Tone

Single low-pitched beep indicates an invalid button press.

DSC Distress Alarm

Loud, continuous, low-pitched series of closely spaced, three (3)
beep groups. Press any button to turn it Off. This alarm sounds for:

Distress call send, receive, and acknowledgement

Distress relay call received

All ships call received

NOTE
This alarm sounds only for DSC distress calls on Channel 70.
It does not sound for voice calls on Channel 16 — you still
must listen for those.

Operating Your Radio

Advertising