tekmar 552 Thermostat Installation - Manual (Page 16)

© 2014 552_D - 09/14
16 of 44 A Watts Water Technologies Company
Setting Display
FLOOR MAXIMUM
Set the floor maximum temperature in order to
protect the floor covering.
Suggested settings:
Tile = 90°F (32°C)
Hardwood Floor = 85°F (29°C)
Access Level: Installer
Range: 40 to 122°F (4.5 to
50.0°C), OFF
Conditions: Sensor 1 or Sensor 2 set to Floor, and
either Room Sensor set to ON, or Room Sensor
set to OFF while Sensor 1 or 2 is set to Room, and
Schedules or Scenes are in use.
Default: 85°F (29.5°C)
TEMPORARY HOLD
Temperature adjustment in the home menu can
result in either permanent temperature setting
change or temporary temperature setting change
that lasts 3, 6, 9, 12 hours or until the next sched-
uled event.
Access Level: Installer
Range: OFF or ON
Conditions: None Default: OFF
Set Temp Menu (3 of 3)