Cisco 7912G - Manual (Page 97)

C H A P T E R
5-1
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
5
Configuring Telephony Features
After you install Cisco Unified IP Phones in your network, configure their
network settings, and add them to Cisco Unified CallManager, you must use the
Cisco Unified CallManager Administration application to configure telephony
features.
This chapter provides an overview of these configuration and set-up procedures.
Cisco Unified CallManager documentation provides detailed instructions for
these procedures.
For suggestions about how to provide users with information about features, and
what information to provide, see
Appendix B, “Providing Information to Users
Via a Website.”
After you add Cisco Unified IP Phones to Cisco Unified CallManager, you can
add functionality to the phones.
Table 5-1 includes a list of supported telephony
features, many of which you can configure using Cisco Unified CallManager
Administration. The Reference column lists Cisco Unified CallManager
documentation that contains configuration procedures and related information.
Note For information about additional features available on you phone and information
about using all features on your phone, refer to the Cisco Unified IP Phone
7905G/7912G Phone Guide for Cisco Unified CallManager 5.0 (SIP). For more
information about service parameters and the functions that they control, refer to
Cisco Unified CallManager Administration Guide.