Cobra Electronics 12 BAND XRS 9340 - Manual (Page 9)

To Turn VG-2 and Spectre 1 Alerts On and Off
While no signal is being
detected, press and
hold the Dim button
for four seconds. Tone Visual Display
On = Two beeps
Off = One beep
V will blink twice in the display
V will blink once in the display
Dim Button
Press and hold
for two seconds
Detection
Your Detector
Nothing Comes Close to a Cobra ® 13
Detection
•
Signals Detected
The tables on the following pages show you the types of Signals your
detector will detect, as well as the visual alerts it provides for each of them.
Audio Alerts
A distinctly different Alert tone is used for each type of signal detected
(including separate tones for each laser signal). For X, K, Ka and Ku band
radar signals, the tones will repeat faster as you approach the signal
source. The repeat rate of the tones gives you useful information about
the signal detected. (See responding to alerts on page 16.)
Visual Display
An indication of the type of signal detected will appear in the UltraBright
data Display. During X, K, Ka and Ku alerts, a number will also appear,
indicating the strength of the signal detected. (1 = weakest, 5 = strongest)
During laser alerts the letter
L
will appear, instead of the signal strength indication.
During VG-2 or Spectre 1 alerts, the letter V will appear. It will be steady
during VG-2 and blink during Spectre 1.
During Safety Alert and Strobe Alert the letter S will appear. It will be
steady during a Safety Alert and will blink during a Strobe Alert.
Settings
Your Detector
VG-2 and Spectre 1 Alert Settings
The detector is undetectable by police VG-2 and Spectre 1 radar detector
detectors and will alert you when such a device is in use near your vehicle.
During the alert, the unit continues to detect other signals. You can choose
whether or not you want your unit to show VG-2 and Spectre 1 alerts.
The factory setting is VG-2 and Spectre 1 alert Off.
On/Off Indicator
X K Ka V S
c
X Signal Detected
X K Ka V S
2
X K Ka V S
3
X K Ka V S
5
X K Ka V S
4
Laser Signal Detected
X K Ka V S
L
VG-2 Alert Signal Detected
X K Ka V S
c
K Signal Detected Ka Signal Detected Ku Signal Detected
Safety Alert Signal Detected
X K Ka V S
c
Strobe Alert Signal Detected
X K Ka V S
c
Spectre 1 Alert Signal Detected
X K Ka V S
c
To Turn X Band On and Off
While no signal is
being detected, press
and hold both the Dim
and Mute buttons for
four seconds. Tone Visual Display
X On = Two beeps X will blink twice in the display
X Off = One beep
X will blink once in the display
To Turn K Band On and Off
While no signal is
being detected, press
and hold both the
Mute and City buttons
for four seconds. Tone Visual Display
K On = Two beeps K will blink twice in the display
K Off = One beep K will blink once in the display
To Turn Ku Band On and Off
While no signal is being
detected, press and
hold the City button
for four seconds. Tone Visual Display
Ku On = Two beeps X and K will blink twice in the display
Ku Off = One beep X and K will blink once in the display
12 English
Radar Alert Settings
The detector allows you to choose whether it will show alerts on the X, K,
and Ku bands. The factory settings are: X Band and K Band On; Ku Band Off.