Clarinet Systems EthIR LAN - Manual (Page 57)

F-7
3. Click on Windows Setup tab, choose Communications then click on
Details button.
4. Check the item Direct Cable Connection, as illustrated above, and then
click OK. Click OK again in the next window. Windows 98 may ask for
the Windows 98 CD-ROM to be inserted into your CD-ROM drive. If the
CD-ROM is not available enter
\WINDOWS\OPTIONS\CABS in the path
line of the dialog box.
Configure Infrared Monitor for Direct Cable Connection
1. Double-click the Infrared icon under Start\Settings\Control
Panel , select Options tab and uncheck the Install software for Plug and
Play devices within range as illustrated below. Note the COM port under
Enable infrared communication. This is the virtual COM port, which your
notebook’s IR port uses. In this example, the IR port uses COM4 (Refer to
Configure Direct Cable Connection for the First Time, step 2, on page F-9).