Unitec Sierra Site Controller - Manual (Page 2)

W A S H P A Y
Document Number: WP1001
Document Name: WashPay Site Controller Installation Manual
SIERRA SITE CONTROLLER
INSTALLATION MANUAL
Revision D
This manual provides comprehensive installation procedures for the WashPay system.
It includes the process of site planning, site preparation, the mechanical installation of
the WashPay system and the electrical wiring of the unit.
If further assistance is needed, please contact the distributor from which the WashPay
system was purchased.
When calling for assistance, you must have the following information available:
Site Controller Serial Number: ____________
Distributor Name:
D E C L A R A T I O N O F C O M P L I A N C E
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense
.
C O P Y R I G H T
© 2012 Unitec, Incorporated. All rights reserved. No part of this book, including text,
screen examples, diagrams, or icons, may be reproduced or transmitted in any form,
by any means (electronic, photocopying, recording, or otherwise) without prior written
permission of Unitec, Incorporated.
T R A D E M A R K S
WashPay, Unitec, and the Unitec Logo are trademarks, service marks, or registered
trademarks of Unitec, Incorporated.
All other products, services, and company names are trademarks or registered
trademarks of their respective owners.