Disconnection from a site – Unitec Wash Select II POS Owner’s Manual User Manual
Page 95

W A S H S E L E C T I I
Document Number:
WS21002
81
Document Title:
WSII Operations Manual
PRESS NUMBER + ENTER KEY TO ACTIVATE FUNCTION
0 = DAILY REPORT TODAY (NOT FINISHED)
1 = DAILY REPORT YESTERDAY
2 = DAILY REPORT TWO DAYS AGO
3 = DAILY REPORT THREE DAYS AGO
4 = DAILY REPORT FOUR DAYS AGO
5 = DAILY REPORT FIVE DAYS AGO
6 = DAILY REPORT SIX DAYS AGO
7 = DAILY REPORT SEVEN DAYS AGO
888 = MAIN MENU
999 = HANG UP
ENTER YOUR CHOICE:
For the Enhanced Remote Reporting to work, there should be an Expansion memory added
to U57 on the CPU board of the Wash Select II. If the Wash Select II is not equipped with the
expansion memory, the following error message shows up on Remote Reporting.
EXPANSION MEMORY REQUIRED!!!
The Enhanced Remote Reporting option automatically saves the daily accounting of a given
day from 12:00 a.m. until 12:00 a.m. the next day.
Note:
It is important that the system clock be set to the local standard time for this feature to
function properly!
To switch to the Main menu from the Daily Reports menu, type 888.
2.13.6
Disconnection from a Site
You should always perform the following procedure to disconnect:
44.
Press 999 then the <Enter> key.
45.
The Wash Select II will display: “Goodbye”
46.
You may now Click the Disconnect menu item under the Call menu or you may
click the disconnect toolbar item (phone with handset lifted up)
47.
Always wait until the Wash Sele
ct II displays “Goodbye” before hanging up.