Valco Baby Matrix - Manual (Page 2)

OPENING YOUR STROLLER
FIGURE A
1. If your frame is locked, lift the securing
strap off the rivet head on the stroller
frame.
2. On a clean flat surface, open the stroller
frame by lifting the handle upward.
3. The stroller frame will unfold from
beneath. Press down on the locking
hinge with your hand or foot to lock
the chassis open.
INSTALLING THE FRONT
SECTION
FIGURE b
4. Standing in front of the stroller,
lift the stroller by the front tubes, tilting
the front leg section upward toward you.
5. Insert each tube of the front footrest
section into the corresponding tube
at the front of the stroller frame.
6. One leg at a time, depress each spring
loaded button and further insert the
footrest into the stroller frame.
7. Continue to insert these tubes until
the footrest is fully locked into place
on both sides.
INSTALLING REAR AxLE
(BRAkES)
FIGURE C
8. With the brake levers facing AWAY from
the stroller, match the plastic housings
on the rear brake section with the rear
stroller legs.
9. One leg at a time, depress each spring
loaded button and further insert the
brake section into the stroller frame,
continue until the brake is fully locked
into place on both sides.
A
b
C
CLICK
2
3
5
6
9