Canon ImageCLASS MF3240 - Manual (Page 6)

9
7
Pinch and slide the lock release lever so that the
side paper guides match the side of paper.
NOTE
Make sure the paper stack does not exceed the load limit
mark (A) and it is loaded under the hooks (B) on the side
paper guides.
8
Gently insert the paper cassette as far as it will go.
CAUTION
Do not push in the paper cassette at an angle. Doing so
may damage the paper sensing lever inside the
machine.
NOTE
If you do not completely insert the paper cassette into
the machine, paper jams may occur.
9
Insert the tabs on the extension cover into the slots
(A) on the back of the machine, and carefully lower
the cover (B) until it sits on the cassette extension
beneath it.
CAUTION
Do not load paper from the back of the machine. Doing
so may damage the paper feeding assembly inside the
machine.
NOTE
– The default paper size/type setting is <LTR> and
<PLAIN PAPER>. When you load other size and/or
type of paper, change the paper size/type setting. For
details, see Chapter 3, “Setting Paper Size and Type,”
in the Basic Guide.
– For loading paper in the multi-purpose feeder, see
Chapter 3, “Print Media,” in the Basic Guide.
A
A
B
A
A
B
10