Vocas MBS-100 Type G4 - Manual (Page 7)

© Vocas Systems B.V. Tel: +31(0)35-6233707, e-mail [email protected]
7
Attaching this support to the DVX-100 and Sony HVR-Z5E
1.
Remove the camera pin and the ¼” camera screw with a
screwdriver.
2.
Also remove the “vertical alignment adjustment screw” with the
supplied hexagonal key.
3. Rotate the clamping mechanism 180 degrees and reattach it to the
baseplate (see illustration below).
4.
Also reattach the camera pin and ¼” screw as shown in the below
illustration