Vocas MBS-100 Type I - Manual (Page 6)

© Vocas Systems B.V. Tel: +31(0)35-6233707, e-mail [email protected]

For proper alignment of the tubes, the support can be adjusted in both
vertical and horizontal directions. Please see the “guide to components”
which screws have to be used to adjust the support. To check the
alignment, the supplied “Alignment card” can be used. Slide the two
holes in the card over the two installed 15mm tubes and check if the
lens front corresponds with the big circles on the Alignment card.
The alignment card can also be used as a back focus- or white card.

If more horizontal adjustment is needed, there are more sets of holes
for the horizontal alignment screws available.