Waring BB185 - Manual (Page 4)

BLENDER
ONE QUART CAPACITy SPECIFICATIONS
• Ratings 120 VAC- 50/60 Hz- single phase
• Motors Permanently lubricated series-wound
universal type
• Container 44 oz. Polycarbonate or 32 oz. Stainless Steel
• Cord 6 foot 18 gauge three conductor grounding
cord with strain relief
•
c
ETL
us
listed 120 Volt models
GROUNDING INSTRUCTIONS
• For your protection, Waring
®
Commercial Blenders are
equipped with a 3-conductor cord set.
• 120 volt units are supplied with a molded 3-prong grounding
type plug and should be used in combination with a properly
connected grounding-type outlet, as show in Figure A.
If a grounding type outlet is not available, an adapter, shown in
Figure B, may be obtained to enable a 2-slot wall outlet to be
used with a 3-prong plug.
Referring to Figure C, the adapter must be grounded by
attaching its grounding lug under the screw of the outlet cover
plate.
CAUTION: Before using an adapter, it must be determined that
the outlet cover plate screw is properly grounded. If in doubt,
consult a licensed electrician.
Never use an adapter unless you are sure it is properly
grounded.
NOTE: Use of an adapter is not permitted in Canada.
10wc111308_bb185_ib.indd 4 4/7/10 10:59:31 AM