Waring WEB300 - Manual (Page 3)

GROUNDING INSTRUCTIONS
For your protection, Waring ® Commercial Extra Burners are equipped
with a 3-conductor cordset that has a molded 3-prong grounding-type
plug, and should be used in combination with a properly connected
grounding-type outlet as shown in Figure 1.
If a grounding-type outlet is not available, an adapter, shown in Figure 2,
may be obtained so that a 2-slot wall outlet can be used with a 3-prong
plug. As shown in Figure 3, the adapter must be grounded by attaching
its grounding lug under the screw of the outlet cover plate.
CAUTION: Before using an adapter, it must be determined that the
outlet cover plate screw is properly grounded. If in doubt, consult a
licensed electrician. Never use an adapter unless you are sure it is
properly grounded.
Note: Use of an adapter is not permitted in Canada.
SHORT CORD INSTRUCTIONS
A short power-supply cord is provided to reduce the risk resulting from
becoming entangled in or tripping over a longer cord.
If a longer detachable power-supply cord or extension cord is used, (1)
the marked electrical rating of the extension cord should be at least as
great as the electrical rating of the appliance, and (2) the longer cord
should be arranged so that it will not drape over the countertop or table
top where it can be pulled on by children or tripped over unintentionally.