Waring WSM7Q - Manual (Page 4)


FEATURES AND BENEFITS
1. Tilt-back head
Makes it easy to attach accessories
and scrape sides of bowl.
2. Top Cover
3. Accessory Power Port
Chef’s whisk, flat mixing paddle, dough
hook and splashguard connect to
this port.
4. 7 Quart Stainless Steel Bowl
with handles
Handles make the bowl easy to hold,
scrape and remove. Oversized bowl
lets you mix larger quantities.
5. head-lift Release Lever
Securely locks stand mixer head into
raised tilt-back position.
6. On/Off, Pulse and Speed Control Dial
12 speeds for precision mixing.
7. Chef’s Whisk
Used for incorporating air into
ingredients/mixtures. Most frequently
used for whipping eggs, egg whites or
heavy cream. The chef’s whisk would
be used in recipes for angel food cake,
chiffon cake, meringue or dacquoise,
and for whipping potatoes after they
have been mashed using the flat
mixing paddle.
8. Flat Mixing Paddle
Used for stirring, mixing, beating
ingredients/mixtures. Most frequently
used for mixing cookies, cakes, batters
(use flat mixing paddle to start the
batter for yeast breads, then switch to
dough hook for a more evenly mixed
dough), and frostings. It is also used
for making piecrusts, biscuits and
shortcakes, dough for pasta,
combining ingredients for meatloaf or
meatballs, and mashing potatoes.
9. Dough hook
Used for the final mixing and kneading
of yeast doughs for breads, rolls, pizza/
focaccia, and yeast-raised coffee
cakes.
10. Splashguard with Feed Chute
Prevents spattering when mixing and
adding ingredients.
See diagram on next page.
ASSEMBLY
INSTRUCTIONS
1. Raise Mixer head – Pull up the head-lift
release lever and raise the stand mixer
head until it locks into place.
2. Attach Accessory – Place flat mixing
paddle, chef’s whisk or dough hook
into the accessory power port. Turn
counterclockwise until it locks. Turn
clockwise to remove.
3. Place Bowl on Base – Turn clockwise
to secure.
4. Lower Mixer head – Pull up head-lift
lever again and fully lower the mixer
head.
5. To Attach Splashguard – Before
attaching an accessory, raise stand mixer
head and push the splashguard onto the
rim above the accessory power port until
it fully snaps into place.
To remove: Raise the stand mixer head
and slide shield off rim.
Note: You do not need to remove
splashguard to change accessories.