Using the camera – Wildview STC-WV30 User Manual

Page 15

Advertising
background image

www.wildviewcam.com  

Toll  Free  877-­‐269-­‐8490  

15  

USING  THE  CAMERA  

Once   all   program   settings   have   been   setup   properly,   your   Wildview   Cam  
camera  is  ready  for  field  use.  
 

Getting  started  

Listed  below  are  some  helpful  pointers  on  how  to  use  your  camera  to  get  the  
best  results.  

Mount   the   camera   about   4-­‐5   feet   high   with   the   camera   pointed   at   a  

slight  downward  angle.    

Mount   the   camera   facing   north   or   south   NOT   east   or   west   due   to   the  

rising   and   setting   of   the   sun   could   produce   false   triggers   and  

overexposed  images.  

If   you’re   covering   a   trail,   face   the   camera   down   or   up   the   trail.   Most  

game  scouting  cameras  take  1-­‐3  seconds  to  sense  motion/heat  and  take  
a  picture.  

Clear   out   any   brush   or   weeds   in   front   of   camera.   This   will   cause   false  

pictures  caused  wind  or  high  temperature  days.  

Double  check  batteries  before  turning  on  the  camera  for  use.  

Make  sure  to  insert  the  memory  card  after  setting  up  the  game  camera.  

Make   sure   to   turn   the   camera   to   the   ON   position   (or   take   out   of   Test  

Mode)  before  you  leave.  

Verify  time  and  date  is  correct.  

 
 

Advertising