Winchester Repeating Arms Super X2 Practical Supplement (Historic Manual) - Manual (Page 4)

NOTES
6
sight in the dove tail. Carefully tap with a hammer using a
non-metal drift against the sight base.
C LEANING P ARTS WITH S PECIAL F INISHES
Be especially careful when cleaning guns with Dura-Touch ®
Armor Coating and other special finishes. Always prevent
these surfaces from coming in contact with cleaning solvents,
barrel scrubbers and other strong chemicals. It is preferable
to clean these surfaces with a light gun oil containing no
solvents or with a damp cloth and mild dish soap (be sure to
keep water out of the action). When cleaning your firearm’s
bore and action, protect the external finishes from any
contact with chemicals used. Also, avoid any contact
between external finishes and other strong chemicals like
those found in DEET-containing insect repellents,
sunscreens, etc. Damage to Dura-Touch and other finishes
caused by chemicals is irreversible and unrepairable.
SERVICE AND REPAIR
For service, repair, and parts information, call for the location
of the Authorized Repair Center near you: 1-800-322-4626.
For information on obtaining parts go to the Winchester
Firearms web site at: www.winchesterguns.com.
For general questions or comments call: 1-800-945-5237.
5