Exide Technologies GB4109 - Manual (Page 6)

Sales x Service x Recycling 888.563.6300 in the USA 800.268.2698 in Canada
3
CHARGER SPECIFICATIONS
The Element Š system specifications are listed below.
LMT-06kW-48-xxxS LMT-10kW-48-
xxxT
LMT-10kW-80-
xxxT
Nominal VA Ratings 48V / 150A 48V / 250A 80V / 120A
Input Specs.
Voltage 480VAC, 3-phase +10% Delta Connection with Earth
Ground
Current (nominal) 8.3A rms / phase 13.8A rms /
phase
13.8A rms /
phase
AC Circuit Size 15A 20A 20A
Power Factor 0.96 (Active Power Factor Correction)
Output Specs.
Voltage 48V Nom. /
62.5V Max.
48V Nom. /
62.5V Max.
80V Nom. /
110V Max.
Current 150A Max. 250A Max. 120A Max.
Power 6 kW Max. 10 kW Max. 10 kW Max.
Pk-Pk Voltage Ripple < 1%
Efficiency (typical) 92% at Full Load
Protection
Input
¾
Under voltage
¾
Over Voltage
Output
¾
Over Current
¾
Over Voltage
¾
Over temperature
¾
Battery reverse polarity protection
Operating Conditions
Ambient Temperature 0 – 40 o C
Humidity 10-90% RH non-condensing
Interface
Communication Isolated RS-232 (Ethernet optional)
User Interface LCD/Keypad, RS-232, IR with a PDA (Palm Pilot)
Cooling Forced air (fans)
Mechanical
Dim. WxDxH 29"x8.5"x28"
Weight ~ 98 lb
Output Cabling 2/0 cables
Output Connectors SBX w/aux. contacts or Euro Connector
Auxiliary Contacts Interface with 5kȍ battery thermistor (optional)
Certifications UL and cUL Listed
Note: Design and/or specifications are subject to change without notice. If questions arise,
contact your local sales representative for clarification.